Flow Switch and Bubble Detector IC components for Liquids LG01

Flow Switch and Bubble Detector IC components for Liquids LG01

The LG01 Flow Switch sensor detects ultra-low liquid flow rates or the presence of air in fluidic systems and therefore makes them more reliable. The detection of liquid flows is possible within the range of a few ml/min and less. The sensor's output signal of either 0 or 5 volts indicates whether the current flow rate is above or below the specified flow switch level. At flow rates above this limit the identification of air bubbles within the flow channel is equally consistent. The non-invasive measurement principle of the liquid flow sensor LG01 allows detecting the current state of fluid through the wall of the internal glass capillary. Thus, the sensor provides highest bio-compatibility and chemical resistance. Measurements of the liquid flow detector are performed with a response time of less than 100ms.

Features
Maximum flow rate up to 220 ml/min (valid for H2O)
Standard Switch Limit at 4.5 ml/min or 0.25 ml/min (valid for H2O)
Air-/bubble detection enabled
Fluid connections: 1/4-28 standard fittings for OD 1/8" (3.2 mm) or 1/6" (1.6 mm) plastic tubing
Fast response below 100 ms
Wetted materials: inert, bio-compatible (glass, PEEKTM, Teflon)
Supply voltage of 5....12V

Applications
Bio-medical devices
Fuel supply monitoring
Lab automation
Production equipment

Flow and bubble detector

bubble detector

LG01

Flow Switch and Bubble Detector IC components for Liquids LG01 Images